Skip to content

Competences

Heat-shrink tubing sizes

A wide range of diameters, wall thicknesses and shrink ratios

A wide range of heat-shrink tubing sizes

Our heat-shrink tubing covers a broad spectrum of diameters, wall thicknesses and shrink ratios – from thin-walled, flexible polyolefin heat-shrink tubing and medium-walled types to thick-walled heat-shrink tubing with adhesive. Each product page shows the complete size table with the diameter before and after shrinking, the wall thickness and the packaging unit.

How to choose the right size

  • Diameter before shrinking (as supplied): must be larger than the thickest point of your object – otherwise the tubing cannot be slid on.
  • Diameter after shrinking: must be smaller than the thinnest point – only then will the tubing fit tightly everywhere after heating.
  • Shrink ratio (2:1, 3:1, 4:1 up to 6:1): the greater the difference between the thickest and thinnest point, for example at connectors or cable transitions, the higher it should be.
  • Wall thickness: determines the mechanical protection – thin-walled for flexible insulation, thick-walled for high loads.

Heat-shrink tubing by type – sizes on each product page

BP 125 halogen-free heatshrinkable tubingBP 125Heat-shrink tubing2:1-55 °C to 125 °C

BP 125 halogen-free heatshrinkable tubing

BP 125 · Polyolefin

Made from halogen-free polyolefin, BP 125 is flexible high-quality heat-shrink tubing with outstanding chemical, dielectric and physical properties.

Ø 1.2 – 150.0 mm

Thin-wallFlame-retardantFlexibleHalogen-freeFlame-retardantUL-approved20 sizes
Details & inquiry
Polyolefin heat-shrink tube with improved shrink ratio (BP 300)BP 300Heat-shrink tubing3:1-55 °C to 135 °C

Polyolefin heat-shrink tube with improved shrink ratio (BP 300)

BP 300 · Polyolefin

BP 300 is flexible cross-linked polyolefin tubing with a shrink ratio of 3 to 1. This allows BP 300 to shrink around different components that vary in diameter and size.

Ø 1.5 – 50.0 mm

Thin-wallFlame-retardantHigh shrink ratioUL-approvedApproval: UL 224 (except transparent)11 sizes
Details & inquiry
BP 135 - UL 224 shrinkable tubingBP 135Heat-shrink tubing2:1-55 °C to 135 °C

BP 135 - UL 224 shrinkable tubing

BP 135 · Polyolefin

BP 135 is flexible high-performance heat-shrink tubing made from radiation cross-linked polyolefin.

Ø 1.2 – 150.0 mm

Thin-wallFlame-retardantFlame-retardantUL-approvedApproval: UL 224 VW-1 (except transparent)18 sizes
Details & inquiry
Adhesive-lined heat-shrink tube (BPDW 102)BPDW 102Heat-shrink tubing2:1-55 °C to 125 °C

Adhesive-lined heat-shrink tube (BPDW 102)

BPDW 102 · Polyolefin

BPDW 102 is highly flexible heat-shrink tubing made of polyolefin with adhesive lining inside.

Ø 1.6 – 25.4 mm

Thin-wallFlame-retardantAdhesive-linedFlame-retardantUL-approvedApproval: UL 22410 sizes
Details & inquiry
Adhesive-lined heat-shrink tube (BPDW 100)BPDW 100Heat-shrink tubing3:1-55 °C to 125 °C

Adhesive-lined heat-shrink tube (BPDW 100)

BPDW 100 · Polyolefin

BPDW 100 is flexible heat-shrink tubing made of polyolefin with adhesive lining and with a shrink ratio of 3 to 1.

Ø 3.0 – 39.0 mm

Flame-retardantHigh shrink ratioAdhesive-linedFlame-retardantUL-approvedApproval: UL 224 (except transparent)8 sizes
Details & inquiry
Adhesive-lined high-ratio shrink tube (BPDW 104)BPDW 104Heat-shrink tubing4:1-55 °C to 125 °C

Adhesive-lined high-ratio shrink tube (BPDW 104)

BPDW 104 · Polyolefin

BPDW 104 is flexible heat-shrink tubing made of polyolefin with adhesive lining and with a shrink ratio of 4 to 1.

Ø 4.0 – 52.0 mm

Flame-retardantHigh shrink ratioAdhesive-linedFlame-retardantUL-approvedApproval: UL 224 (except transparent)7 sizes
Details & inquiry
Adhesive-lined medium-wall heat-shrink tube (BPMW A)BPMW AHeat-shrink tubing3:1-55 °C to 110 °C

Adhesive-lined medium-wall heat-shrink tube (BPMW A)

BPMW A · Polyolefin

Made of polyolefin, BPMW A is medium-wall heat-shrink tubing.

Ø 9.0 – 350.0 mm

High shrink ratioAdhesive-linedMedium-wallUV-resistant22 sizes
Details & inquiry
Adhesive-lined thick-wall heat-shrink tube (BPTW A)BPTW AHeat-shrink tubing3:1-55 °C to 110 °C

Adhesive-lined thick-wall heat-shrink tube (BPTW A)

BPTW A · Polyolefin

The combination of high wall thickness and adhesive lining give BPTW A heat-shrink tubing its superior mechanical properties.

Ø 9.0 – 350.0 mm

Thick-wallHigh shrink ratioAdhesive-linedUV-resistant17 sizes
Details & inquiry
Adhesive-lined heavy-wall high-ratio shrink tube (BPHW A)BPHW AHeat-shrink tubing6:1-55 °C to 110 °C

Adhesive-lined heavy-wall high-ratio shrink tube (BPHW A)

BPHW A · Polyolefin

BPHW A is heavy-wall heat-shrink tubing with adhesive lining and with an especially high shrink ratio of 6 to 1.

Ø 19.0 – 235.0 mm

Thick-wallHigh shrink ratioAdhesive-lined8 sizes
Details & inquiry
Heat-shrink tubing sizes

Colours and special sizes

Many of our heat-shrink tubing types are also available in various colours – ideal for colour-coding cables and wires: coloured heat-shrink tubing.

Further special sizes as well as cutting and processing to your specifications are also possible. Please contact our sales team.

All heat-shrink tubing

Would you like a quote?

Call us (+49225496100), send us an email or get in touch via our contact form:

Send us a message

Fill in the form – we usually reply within 24 hours.