Coloured heat-shrink tubing
We stock a wide range of brown heat-shrink tubing
Cables, wires and even ropes often need to be marked in brown. We offer a range of heat-shrink tubing in brown.
The outer conductor, or phase conductor – abbreviated to L – is marked in brown. The outer conductor is the live cable that supplies the appliance with electrical power.
Brown heat-shrink tubing is available with a shrink ratio of 2:1 or 3:1 and, on request, with an adhesive coating.
Please get in touch – we’re sure to have the right heat-shrink tubing for your application.
Here you will find our full range of heat-shrink tubing.
Would you like your brown heat-shrink tubing to be custom-printed? You can find information here about printing on heat-shrink tubing.
BP 125Heat-shrink tubing2:1-55 °C to 125 °CBP 125 · Polyolefin
Made from halogen-free polyolefin, BP 125 is flexible high-quality heat-shrink tubing with outstanding chemical, dielectric and physical properties.
Ø 1.2 – 150.0 mm
BP 135Heat-shrink tubing2:1-55 °C to 135 °CBP 135 · Polyolefin
BP 135 is flexible high-performance heat-shrink tubing made from radiation cross-linked polyolefin.
Ø 1.2 – 150.0 mm
BP 135 VW-1Heat-shrink tubing2:1-55 °C to 135 °CBP 135 VW-1 · Polyolefin
BP 135-VW-1 heat-shrink tubing is made of polyolefin and practically non-flammable.
Ø 1.2 – 150.0 mm
BP 300Heat-shrink tubing3:1-55 °C to 135 °CBP 300 · Polyolefin
BP 300 is flexible cross-linked polyolefin tubing with a shrink ratio of 3 to 1. This allows BP 300 to shrink around different components that vary in diameter and size.
Ø 1.5 – 50.0 mm
BPDW 100Heat-shrink tubing3:1-55 °C to 125 °CBPDW 100 · Polyolefin
BPDW 100 is flexible heat-shrink tubing made of polyolefin with adhesive lining and with a shrink ratio of 3 to 1.
Ø 3.0 – 39.0 mm
WPS 105Heat-shrink tubing2:1-30 °C to + 105 + 70 (transparent) °CWPS 105 · Flexible PVC
WPS 105 is flexible thin-wall heat-shrink tubing well-suited to electrical and mechanical insulation tasks.
Ø 2.4 – 101.6 mm
HPSHeat-shrink tubing2:1-20 °C to +85 °CHPS · Rigid PVC
HPS is ultra-thin walled heat-shrink film made of lay flat unplasticized PVC (polyvinyl chloride). It is perfect for the assembly of capacitors, battery and charge packs.
Ø 2.5 – 220.0 mm
BPH 125Heat-shrink tubing2:1-55 °C to +125 °CBPH 125 · Polyolefin
BPH 125 is flexible heat-shrink tubing made from polyolefin with very good chemical, dielectric and physical properties.
Ø 1.2 – 150.0 mm
BPPETHeat-shrink tubing2:1-40 °C to 125 °CBPPET · Polyester
Made of halogen-free lay flat polyester, BPPET is an environment-friendly type of ultra-thin walled heat-shrink film.
Ø 2.0 – 95.0 mm
Would you like a quote for brown heat-shrink tubing for your application?
Please call us (+49225496100), send us an email or get in touch via our contact form: